Low Volume Application System is an inoculant applicator for biological inoculants that use concentrated bacteria levels. It is the only applicator in the world, that has an insulated wall to protect the bacteria from high temperatures. If the bacterial liquid temperature is more than 40 degrees, there is a risk of degrading the bacteria. Until now, no one has tried to solve this issue. Recent weather developments has proven a need for this technology.
- The applicator can be used both on forage harvesters, balers.
- The applicator can be connected to FlowMatic Lite or FlowMatic Digitech.
- The system includes the complete equipment needed for installation.
LDS applicator is tested by Christian Hanssen and recommended to all sellers and customers. Our cooperation with company Bioferm brings continuous improvement of the applicator systems. The LDS use a gear micropump. Everything is made of 316 L stainless steel and ground to one thousandth of a millimeter. The pump dosing is from 0.05 – 018 l / min. A special nozzle produces a mist effect spay pattern and sprays the bacterial into ventilator.
Ventilator sucks the mist and mixes it together with the crop
Insulated wall
Application equipment has an insulated wall to protect bacteria from high temperatures.
LDS can be used on Harvesters, Round bailers or Self-loading wagons. The application system can be connected to FlowMatic Lite, or FlowMatic Digitech. Included in the equipment The applicator contains all components for mounting.
Quality
LDS applicator is tested by Christian Hanssen and recommended to all sellers and customers.
Pump:
The universal LDS Application system uses a gear micropump. The pump applies in a range 0.05 – 018 l / min. Two bottles of clean water are placed in the front to rinse the device.
Nozzles:
A special nozzle on the end of the holder sprays bacterial fluid over the pickup. Forage harvesters have the nozzle mounted in the fan housing. Bacterial mist is absorbed and mixed into the crop.
Maintenance:
During longer breaks or at the end of the work, the pump must be rinsed with water. The suction hose is released and inserted into the container with clean water. After rinsing, the hose returns to its original position. For flushing, you can use the control unit located at the bottom – applies when using Flowmatic Digitech
