Applisil GPB-8

Inoculant applicator for crimping and spraying grain

Specification

The Applisil GPB-8 fitt to 200 L barrel. System is equipped with a gear pump that can withstand even highly concentrated acids.

The set includes a special magnetic valve, that prevents the preservative from escaping through the nozzles and thus prevents dripping

Pump:
Gear Pump
Pressure:
1,5 bar.
Dosing:
max. 8 l / min.
Voltage:
12 V DC / 10 A
Use:
  • Crimping
Suitable for:
  • Biologic conservation
  • Acid baset conservation
  • High concentration acids

The applicator can be connected to Flowmatic Lite or Flowmatic Digitech.

The system is delivered complete with all components necessary for complete assembly. Including hoses, nozzles, cables, etc.

  1. GPB-8 pump
  2. 12 V cable – with 3-pin connector
  3. Quick coupling on the hose
  4. Remote control cable
  5. Cable to the flow meter
  6. Anti-drip magnetic valve
  7. Cable to the pump
  8. Hose – 6 m
  9. Digital flow meter
  10. Hose clamps – stainless steel A4
  11. Flowmatic holder
  12. Control unit – Flowmatic Lite
  13. Tube with nozzles
  14. Replacement nozzles

Nozzle:
The nozzles provided with the dosing system are positioned so that they cover the entire area above pick up. Nozzle holders can be shaped. They can be placed in several places. To select the correct nozzle, we recommend using the table, which shows the nozzle color and nozzle pressure

Magnetic valve:
Complete set includes a special magnetic valve. This valve has almost no flow resistance. Prevents the preservative from flowing out through the nozzles and prevents dripping.

Nozzle:
The nozzles provided with the dosing system are positioned so that they cover the entire area above pick up. Nozzle holders can be shaped. They can be placed in several places. To select the correct nozzle, we recommend using the table, which shows the nozzle color and nozzle pressure

Leaflets to download

Product leaflet

Applisil GPB-8 Inoculant applicator for crimping and spraying grain
Download leaflet